2litre hot water bottle & knitted cover

2 ltr hot water bottle with knitted cover sold in wholesale quantities.

Bottle material: natural rubber. Cover: acrylic. Colours: cream, grey and pink. Hot water bottle without cover: cream.

Approx size: 32 x 20.5 x 4.5cm.

Hot Water Bottle Instructions

Directions of use:

• Do not use boiling water when filling the hot water bottle.
• Fill to maximum 2/3 capacity.
• Hold the bottle by the neck in an upright position and fill slowly to avoid hot water splashing back.
• Expel air from the bottle by lowering it carefully onto a flat surface until water appears at the opening.
• Screw the stopper sufficiently tight to ensure that there is no leakage.
• Finger tight should be adequate.

Warning:

• Do not fill using water from the domestic water system as this can considerably shorten the life of the bottle.
• When not in use, drain completely and keep, with the stopper removed, in a cool, dry and dark place.
• Check the hot water bottle and stopper for wear and damage at regular intervals.
• Prevent contact with hot surfaces.
• Prevent contact with oil or grease.
• Prevent exposure to sunlight.
• Do not lie or sit on the hot water bottle.

Safety information slip included with the bottle.